Need help?Do you have a question about the AUX ANB66FVAMT and is the answer not in the manual?
General| Brand | AUX |
|---|---|
| Model | ANB66FVAMT |
| Category | Air Conditioner |
| Language | English |
Highlights the key features of the DC inverter ARV individual series.
Details the energy-saving aspects of the DC inverter compressor and heat exchanger.
Details control logic, symbols, and startup procedures.
Lists effective and ineffective protections during system startup.
Lists various protection functions like compressor restart and discharge temp.
Details the IPM sensor's temperature detection and protection mechanism.
Explains how high pressure triggers compressor frequency reduction.
Defines over current protection based on compressor operation current.
Lists sensor failures that cause system stop and error codes.
Describes low pressure protection triggers and reset procedures.
Outlines preparatory steps including confirmation and tool preparation.
Details the location, foundation, and space requirements for outdoor unit installation.
Covers installation notices, capacity ratio, and pipe connection methods.
Explains how to calculate and add refrigerant based on pipe length.
Provides guidelines and specifications for wiring indoor and outdoor units.
Illustrates the step-by-step installation process with a flowchart.
Specifies requirements for the outdoor unit's installation location and foundation.
Guides on tightening the outdoor unit and foundation requirements.
Illustrates the system piping configuration and allowable values.
Explains how to determine pipe diameter based on outdoor unit capacity and indoor unit load.
Details requirements for flaring opening connection and welding procedures.
Outlines the process for testing pipe gas tightness using nitrogen.
Shows wiring diagrams and recommended specifications for power lines.
Outlines the step-by-step procedures for cooling and heating commissioning.
Outlines the steps for commissioning the system in cooling mode.
Outlines the steps for commissioning the system in heating mode.
Explains how error codes are displayed on wired controllers and remote panels.
Lists indoor unit error codes, recovery status, and possible reasons.
Lists outdoor unit error codes related to sensors and refrigerant system protection.
To Next Page
