46 Optional Equipment (for qualified installers only)
© Travis Industries 4101110 100-01256_000
GreenSmart™ Remote Control Installation
Packing List
• Transmitter
• Receiver (with Cover Plate & Switch)
• Fan Control Module
• Velcro
• LP or NG Stepper Motor (with screws and label - attaches to Valve)
• Wire Harness
• (2) Power Leads
• (4) AA Batteries (inside receiver box)
• (2) #8 x ½” Machine Screws
• (2) Wire Ties
• Torx T-20 Wrench
• Wall Mount (for placing the transmitter on a wall)
• (2) Drywall anchors (for wall mount)
• (2) #8 x 3/8” Type B Screws
To Next Page
Loading...
