What to do if my Avantco Ice Maker shows E06 high pressure protection?
If your Avantco Ice Maker displays the error code E06 indicating high pressure protection, it could be due to the fan not starting. Verify the fan and correct any issues. Also, check the high pressure switch wires and correct if necessary.
What to do if Avantco 194UCF120A display shows E04 high temperature?
If your Avantco Ice Maker displays E04 indicating a high temperature issue, the condenser may be dirty or blocked. Clean the condenser to resolve this. Ensure that high pressure switch wires are properly connected.
Why is ice defrost abnormal in my Avantco 194UCF120A?
If your Avantco Ice Maker's ice defrost is abnormal, it might be due to several reasons. The ambient temperature could be too low; ensure it's within the normal working range of 41-95°F. Also, the defrost valve may not be starting normally, so check and correct the defrosting valve. Finally, the ice thickness might be set incorrectly; check and correct the ice thickness setting.
Why does my Avantco 194UCF120A shutdown every 3 minutes?
If your Avantco Ice Maker shuts down every 3 minutes after startup, it could be because the ambient temperature is too high. The normal working temperature range is 41-95°F.
What to do if indicator is OFF on Avantco Ice Maker?
If the indicator light on your Avantco Ice Maker is off, check the plug and socket to ensure they are properly connected.
Visual representation of the ice machine's components and connections.
Detailed, step-by-step instructions for properly setting up the ice machine.
Guidelines for starting, operating, and shutting down the ice machine.
Explanation of the LED display, lamps, and ice thickness adjustment features.
Procedures for cleaning, sanitizing, and understanding fault codes.
Instructions for cleaning the machine's exterior, interior bin, and water filter.
Guidance on condenser care, water line maintenance, and winter storage.
Detailed steps for the automatic clean function and manual sanitizing.
Steps to take and information to gather before contacting service for issues.
Identifies common faults, potential causes, and solutions for the ice machine.
Details on warranty coverage, exclusions, and inquiry procedures for commercial use.
Specific warranty for residential/non-commercial use and how to get service.
Visual representation of the ice machine's components and connections.
Detailed, step-by-step instructions for properly setting up the ice machine.
Guidelines for starting, operating, and shutting down the ice machine.
Explanation of the LED display, lamps, and ice thickness adjustment features.
Procedures for cleaning, sanitizing, and understanding fault codes.
Instructions for cleaning the machine's exterior, interior bin, and water filter.
Guidance on condenser care, water line maintenance, and winter storage.
Detailed steps for the automatic clean function and manual sanitizing.
Steps to take and information to gather before contacting service for issues.
Identifies common faults, potential causes, and solutions for the ice machine.
Details on warranty coverage, exclusions, and inquiry procedures for commercial use.
Specific warranty for residential/non-commercial use and how to get service.
General| Model | 194UCF120A |
|---|---|
| Type | Under Counter Ice Maker |
| Ice Type | Full Cube |
| Power Supply | Electric |
| Voltage | 115 Volts |
| Hertz | 60 |
| Phase | 1 |
| Condenser Type | Air Cooled |
| Dimensions | 23 1/2" x 23 5/8" x 35 3/8" |
| Weight | 100 lb. |
| Refrigerant Type | R-290 |
| Refrigerant | R-290 |
To Next Page