EasyManua.ls Logo

Avantco 194UCF160A - User Manual

Avantco 194UCF160A
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Undercounter Ice Machine
User’s Manual
- 1 -
Please read the manual thoroughly prior to equipment set-up,
operation and maintenance.
194UCF120A, 194UCF160A, 194UCH160A, 194UCF210A,
194UCH210A, 194UCF280A, 194UCH280A
User Manual
10/2021

Questions and Answers

  • M
    matthewscarlaAug 9, 2025
    What to do if my Avantco Ice Maker shows E06 high pressure protection?
    • M
      michael50Aug 9, 2025
      If your Avantco Ice Maker displays the error code E06 indicating high pressure protection, it could be due to the fan not starting. Verify the fan and correct any issues. Also, check the high pressure switch wires and correct if necessary.
  • P
    Priscilla WilsonAug 16, 2025
    What to do if Avantco 194UCF160A Ice Maker display shows E04 high temperature?
    • S
      stephanielongAug 16, 2025
      If your Avantco Ice Maker displays E04 indicating a high temperature issue, the condenser may be dirty or blocked. Clean the condenser to resolve this. Ensure that high pressure switch wires are properly connected.
  • J
    Janet BenitezAug 21, 2025
    Why is ice defrost abnormal in my Avantco 194UCF160A Ice Maker?
    • J
      juanbarnesAug 21, 2025
      If your Avantco Ice Maker's ice defrost is abnormal, it might be due to several reasons. The ambient temperature could be too low; ensure it's within the normal working range of 41-95°F. Also, the defrost valve may not be starting normally, so check and correct the defrosting valve. Finally, the ice thickness might be set incorrectly; check and correct the ice thickness setting.
  • W
    William WilsonAug 27, 2025
    Why does my Avantco Ice Maker shutdown every 3 minutes?
    • K
      kristin35Aug 27, 2025
      If your Avantco Ice Maker shuts down every 3 minutes after startup, it could be because the ambient temperature is too high. The normal working temperature range is 41-95°F.
  • M
    mitchellmichelleSep 2, 2025
    What to do if indicator is OFF on Avantco 194UCF160A?
    • M
      Mrs. Karen WilkersonSep 2, 2025
      If the indicator light on your Avantco Ice Maker is off, check the plug and socket to ensure they are properly connected.

Summary

Warning and Safety

General Safety Precautions

Essential safety warnings regarding fire, explosion, and proper handling of refrigerants.

Installation

Installation Requirements

Conditions and location requirements for proper ice machine installation.

Installation Steps

Step-by-step guide for setting up the ice machine correctly.

Startup and Operation

Startup Procedure

Pre-startup checks and turning on the machine for the first time.

Control Panel

Control Panel Overview

Explanation of the LED display, indicator lamps, and ice thickness adjustment buttons.

Troubleshooting

Fault Diagnosis and Solutions

Identifies common faults, their potential causes, and recommended troubleshooting steps.

Avantco 194UCF160A Specifications

General IconGeneral
Model194UCF160A
Weight126 lb.
Hertz60 Hz
Horsepower1/3 hp
TypeUndercounter
Ice TypeCube
Power115V
Ice Cube TypeCube
Power Supply115V

Related product manuals