To Next PageTo Next PageWhat to do if my Avantco 194KMCH530BA shows E06 high pressure protection?
If your Avantco Ice Maker displays the error code E06 indicating high pressure protection, it could be due to the fan not starting. Verify the fan and correct any issues. Also, check the high pressure switch wires and correct if necessary.
What to do if Avantco Ice Maker display shows E04 high temperature?
If your Avantco Ice Maker displays E04 indicating a high temperature issue, the condenser may be dirty or blocked. Clean the condenser to resolve this. Ensure that high pressure switch wires are properly connected.
Why is ice defrost abnormal in my Avantco 194KMCH530BA?
If your Avantco Ice Maker's ice defrost is abnormal, it might be due to several reasons. The ambient temperature could be too low; ensure it's within the normal working range of 41-95°F. Also, the defrost valve may not be starting normally, so check and correct the defrosting valve. Finally, the ice thickness might be set incorrectly; check and correct the ice thickness setting.
Why does my Avantco Ice Maker shutdown every 3 minutes?
If your Avantco Ice Maker shuts down every 3 minutes after startup, it could be because the ambient temperature is too high. The normal working temperature range is 41-95°F.
What to do if indicator is OFF on Avantco Ice Maker?
If the indicator light on your Avantco Ice Maker is off, check the plug and socket to ensure they are properly connected.
Critical safety information and hazards regarding refrigerant and operation.
Requirements for location, power, water, and step-by-step setup.
Startup procedures, normal operation, and control panel features.
Detailed procedures for cleaning internal/external parts and general upkeep.
Steps for diagnosing issues and contacting service.
Details on models, compatibility, technical specifications, and limitations.
Visual diagrams with detailed measurements for specific models.
Overview of the ice dispenser's structure and internal parts.
Procedures for unpacking, electrical, plumbing, and initial startup.
How to dispense ice, general cleaning, and upkeep.
Troubleshooting common problems and adjusting settings.
Explains warranty terms, coverage periods, and limitations.
Procedures for obtaining service and specific warranty for non-commercial customers.
Critical safety information and hazards regarding refrigerant and operation.
Requirements for location, power, water, and step-by-step setup.
Startup procedures, normal operation, and control panel features.
Detailed procedures for cleaning internal/external parts and general upkeep.
Steps for diagnosing issues and contacting service.
Details on models, compatibility, technical specifications, and limitations.
Visual diagrams with detailed measurements for specific models.
Overview of the ice dispenser's structure and internal parts.
Procedures for unpacking, electrical, plumbing, and initial startup.
How to dispense ice, general cleaning, and upkeep.
Troubleshooting common problems and adjusting settings.
Explains warranty terms, coverage periods, and limitations.
Procedures for obtaining service and specific warranty for non-commercial customers.
General