Avantree Opera - Connecting to Your TV; 1. Optical Port Connection; 2. AUX 3.5 mm Port Connection

STEP 3
Turn on your second pair of Opera headphones, then slide and hold the power switch to
the "PAIR" position until the LED indicator ashes red & blue.
STEP 4
Once connected, the headphones' & transmitter's LED indicators will turn solid blue.
RECONNECTING
For subsequent use, please turn the original pair of Opera headphones on rst. Once
that's connected to the transmitter, you can turn on your second pair of Opera
headphones and wait for a few seconds. If it fails to reconnect, press the button
once to activate.
To purchase Aria 90C headphones, scan the QR code below.
PAIR
OFF
ON
avantree.com/aria-90c
OPERA
Quick Start Guide
13
EN
Adding Another Pair of Headphones
You can add a second pair of Opera headphones (Aria 90c) to your setup while
maintaining low latency.
STEP 1
Make sure your original Opera headphones & transmitter have connected.
STEP 2
On your transmitter, slide and hold the power switch to the "PAIR" position until the LED
indicator ashes red & blue.
OPERA
Quick Start Guide
12
EN
OFF
ON
PAIR