Avantree Opera - 3. RCA Port Connection; Setting Up Your TV for Optical Connections

Specications Transmitter
Bluetooth version V5.0
Bluetooth proles HSP v1.2, HFP v1.7, AVRCP v1.0, A2DP v1.3.1
Audio codec support aptX-LL, aptX, FastStream, SBC
Operating range Class 1: up to 164ft/50m
Specications Headphones
Bluetooth version V5.0
Frequency response (Hz) 20Hz-20KHz
Bluetooth proles HSP v1.2, HFP v1.6, A2DP v1.4, AVRCP v1.2
Audio codec support FastStream, SBC
Battery life Up to 35 hours
Impedance
Sensitivity
Net weight
32
96dB
245g
OPERA
Quick Start Guide
15
EN
Listening with a Soundbar
The pass-through function allows you to listen through both the headphone and an
external soundbar / stereo AVR simultaneously.
STEP 1
Set up the transmitter and connect it to your TV
STEP 2
Plug an additional optical, 3.5mm AUX, or RCA audio cable into the correlating audio
port in the transmitter’s “BYPASS OUTPUT TO SPEAKER” section.
STEP 3
Plug the other end into your external sound system, then you’re good to go.
OPERA
Quick Start Guide
14
EN
LOCK
AUX
AUX
DC IN
OPT
OPT
MIC
AUX
OPT
MIC
Input From TV Bypass Output To Speaker
TV/AUDIO SOURCE
SOUND SYSTEM
Digital OutAUX
Digital OUT
OPT
Input From TV
Bypass Output
To Speaker
OPT
TV