DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
18 of 28
3600-Indyme.doc
3. Configure SVP-II Mode. From the screen shown in Step 1, select SVP-II Configuration
and press Enter.
Use the down arrow key to get to the SVP-II Mode field. Press Enter. Press the Tab
button to set the SVP-II Mode as shown below. Press Enter.
Press the down arrow key to get to the Reset System field. Press Enter. Press the Tab
button to set the value to Y when asked “Are you sure?”
SVP-II Configuration
Hostname: [slnk_00d07e], Address: 192.168.1.10
Phones per Access Point: 5
SVP-II Mode: NetLink IP
System Locked: N
Maintenance Lock: N
Reset System
Enter=Change Esc=Exit Use Arrow Keys to Move Cursor
To Next Page
Loading...
