DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
19 of 28
3600-Indyme.doc
8. Configure the SpectraLink NetLink OAI Gateway
This section describes the SpectraLink NetLink OAI configuration.
1. Connect using a “null-modem” RS232 serial cable and telnet to the IP Address of the
NetLink OAI Gateway. The terminal emulator uses settings of 9600Kb/s, 8 data bits, 1
stop bit and no parity. The following screen is displayed.
Gateway Connection Selection
Hostname: slnk-0642f6, IP Address: 192.168.1.111
Name IP Address
slnk-0642f6 192.168.1.111
Exit
Press Enter to get to the top administration screen.
NetLink OAI System
Hostname: slnk-0642f6, IP Address: 192.168.1.111
System Status Menu
OAI Box Configuration
Network Configuration
Feature Programming
Telephone Line Configuration
Change Password
To Next Page
Loading...
