4-2
Issue 1 July 2001
Adding a held call to the current call
1. Press
Conf
.
The current line and the held line lights flutter.
2. Press the line button of the held call.
3.
Press
Conf
again.
All parties are now connected.
Dropping the last person added to the conference
call
Press the
Menu
button, then press the softkey below the "Drop" display
prompt,
or
Press the Line/Feature button your System Administrator has designated
as the "Drop" button.
The last party connected to the conference call is dropped from the call.
Hold
The Hold feature puts a call on hold until you return to it.
Placing a call on hold
Press
Hold
.
The green light next to the held line blinks.
Returning to the held call
Press the line button of the held call.
The call is restored.
To Next Page
