Table 14: SFP transceivers
Model Description Part number
Important:
Avaya supports SFP transceivers with the following part numbers: AA1419013-E5, AA1419014-E5,
AA1419015-E5, and AA1419025-E5 to AA1419040-E5. However, Avaya strongly recommends using
the newer DDI versions of these SFP transceivers.
1000BASE-T SFP gigabit Ethernet, RJ-45 connector AA1419043-E6
1000BASE-SX SFP 850 nm LC connector AA1419013-E5** This transceiver
has reached end-of-sale (EOS).
For more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
1000BASE-SX SFP 850 nm MT-RJ connector AA1419014-E5** This transceiver
has reached end-of-sale (EOS).
For more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
1000BASE-LX SFP 1310 nm LC connector AA1419015-E5** This transceiver
has reached end-of-sale (EOS).
For more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
1000BASE-XD CWDM SFP From 1470 nm to 1610 nm LC
connector, up to 40 km
AA1419025-E5 to AA1419032-
E5** These transceivers have
reached end-of-sale (EOS). For
more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
1000BASE-ZX CWDM SFP From 1470 nm to 1610 nm LC
connector, up to 70 km
AA1419033-E5 to AA1419040-
E5** These transceivers have
reached end-of-sale (EOS). For
more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
Table continues…
Connecting a transceiver to the switch or switch stack
February 2016 Installing Avaya Ethernet Routing Switch 4900 Series 39
Comments on this document? infodev@avaya.com
To Next Page
Loading...
