Model Description Part number
Important:
AA1419065–E6 remains
available for purchase.
1000BASE-BX10 DDI SFP 1310 nm (tx) and 1490 nm (rx)
gigabit Ethernet, single-fiber LC
connector
AA1419069-E6 (10 km at 1310
nm ) and mating pair AA1419070-
E6 (10 km at 1490 nm)
1000BASE-BX40 DDI SFP 1490 nm (tx) 1310 nm (rx)
gigabit Ethernet, single-fiber LC
connector
AA1419076-E6 (40 km at 1310
nm) and mating pair AA1419077-
E6 (40 km at 1490 nm)
1000BASE-EX DDI SFP 1550 nm, gigabit Ethernet, duplex
LC connector
AA1419071-E6** This transceiver
has reached end-of-sale (EOS).
For more information about EOS
transceivers, and recommended
replacements for your product,
see
Locating end of sale
notices on page 42.
Small form-factor pluggable plus (SFP+) transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision
keying and low interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 15: Supported SFP+ transceivers and cables
Model
Description Part number
10GBASE-SR/SW SFP+ 400 m, 850 nm MMF AA1403015-E6
10GBASE-LRM SFP+ 220 m, 1260 to 1355 nm; 1310 nm
nominal MMF
AA1403017-E6
10GBASE-LR/LW SFP+ 10 km, 1310 nm SMF AA1403011-E6
10GBASE-ER/EW SFP+ 40 km, 1550 nm SMF AA1403013-E6
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
10 meter AA1403018-E6
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
into the SFP+ socket and
connects two 10-gigabit ports
3 meter AA1403019-E6
10GBASE-CX SFP+ 2-pair
twinaxial copper cable that plugs
5 meter AA1403020-E6
Table continues…
Connecting a transceiver to the switch or switch stack
February 2016 Installing Avaya Ethernet Routing Switch 4900 Series 41
Comments on this document? infodev@avaya.com
To Next Page
Loading...
