Avaya ERS 8600 - Old Features Removed From This Release

Avaya Inc. – Proprietary & Confidential.
Use pursuant to the terms of your signed agreement or Avaya policy.
57
config ip ospf bad-lsa-ignore enable
Alternatively use the following NNCLI command:
bad-lsa-ignore enable
Other associated NNCLI commands would be:
no bad-lsa-ignore [enable]
default bad-lsa-ignore [enable]
Setting the ospf bad-lsa-ignore parameter to enabled maybe required to maintain adjacency with other
non-Nortel switch/routers, especially Cisco models.
The same commands under VRF configuration mode are for CLI:
config ip vrf <vrf-id> ospf bad-lsa-ignore <enable|disable>
and for NNCLI:
ip ospf bad-lsa-ignore enable
as well as:
no ip ospf bad-lsa-ignore enable
default ip ospf bad-lsa-ignore [enable]
To execute these commands OSPF needs to be disabled globally first.
There is no JDM support for these commands at this time.
Old Features Removed From This Release
None.