Job Aid
8
July 2003
555-245-768, Issue 1
Comcode 700281124
16 Stop Communication Manager
and Busy Out the Media Server
At the Linux command line, type stop -acf.
On the Maintenance Web Interface, under Server
click Busy Out
Server to busy out the media server.
17 Restart Communication Man-
ager on the Media Server
At the Linux command line, type start -ac to bring the media server up
in the busied out, standby mode.
18 Verify Busied Out Status On the Maintenance Web Interface under Server click View Summary
Status. Make sure the media server is busied out.
19 Reattach All Cables Connect the fiber duplication cable and the Ethernet duplication cable to
the media server with the new hard drive. Connect all the other cables.
20 Check the Status of the Standby
Media Server from the Active
Media Server
Connect to the active media server. Click View Summary Status. Make
sure that the active media server shows data for the standby media
server.
21 Check the Status of the Active
Media Server from the Standby
Media Server
Connect to the standby media server. Click View Summary Status.
Make sure that the standby media server shows data for the active
media server and that the data from both media servers matches.
22 Ping the Connections on the
Media Server with the New
Hard Drive
Under Diagnostics click Execute Pingall. Ensure that all connections,
including the active media server, the IPSI boards, and all administered
connections respond.
23 Check Alarms on Both Media
Server
Under Alarms and Notification click View Current Alarms. Clear any
alarms that appear.
Connect to the active media server. On the SAT command prompt
screen, use the display alarms command.
Clear any alarms that
appear.
Caution: If you cannot clear alarms, stop. Call your service support
group. Do not continue with this task list until alarms have been
resolved.
24 Check the Health of the Active
Media Server
At the SAT command prompt screen, use the list ipserver-interface
and the status health commands.
Check that all connections are work-
ing correctly.
Checklist 4. Final Tasks for Replacing a Hard Drive in an S8700 Media Server
9 Task Description
To Next Page
Loading...
