EasyManua.ls Logo

Avaya S8700 - Final Tasks

Avaya S8700
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Job Aid
6
July 2003
555-245-768, Issue 1
Comcode 700281124
Final Tasks
Checklist 4. Final Tasks for Replacing a Hard Drive in an S8700 Media Server
9 Task Description
1 Log into the Maintenance Web
Interface on the Media Server
with the New Hard Drive
Connect to the Services port on the back of the media server. Open a
browser on your laptop, and using 192.11.13.6, log onto the Mainte-
nance Web Interface.
Note: You must use the initial installation craft password.
2 Check That Processes Are
Running
Under Server click View Process Status and select "Summary and Dis-
play once." Make sure all processes are up except dupmgr (the duplica-
tion cables are not connected yet).
3 Set the Time and Date Under Server click Set Server Time/Timezone. Make changes as nec-
essary.
4 Select Correct Configuration Under Server Configuration and Upgrades click Configure Server and
select IP Connect or Multi-Connect configuration, whichever is the
appropriate configuration.
Note: The existing media server does not have this page because it dis-
appears once the media server’s offer type is configured.
5 (For R1.0/R1.1.x replacement
only) Download and Install the
License and Authentication
Files
Under Miscellaneous click Upload Files to Server (via browser) to
upload the files from the laptop to the media server.
Click Install License and Install Authentication to install the files.
Note: The next time you log in, you will be ASG challenged.
6 (For R1.3 replacement only)
Upgrade Software on the Media
Server with the New Hard Drive
to Match the Software Release
on the Existing Media Server
Insert the software CD into the media server CD-ROM drive. Click
Install New Software Release and continue through the software
installation.
Note: Be sure to select Make Server Upgrade Permanent when the
software upgrade is complete.
7 Install Communication Man-
ager Software Patch
Click Upload Files to Server (via browser) to copy the patch to the
/var/home/ftp directory. Use telnet to access the Linux command prompt
screen. Refer to Avaya S8300 & S8700 Media Server Patching Proce-
dures available at http://avaya.com/support for the patch installation pro-
cedures.
Note: Installing the patch releases the media server into active service.

Other manuals for Avaya S8700

Related product manuals