Migration tasks
Issue 2.1 June 2006 689
Backing up translations
To back up translations:
1. S8710: Place a formatted flash card in the compact flash drive attached to a USB port.
2. Start a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Data Backup/Restore, click Backup Now.
6. Select the data sets and the backup method.
If you select Save ACP translations prior to backup, the media server automatically
saves the translations to the hard disk before the media server saves the translations to the
backup media.
7. Click Start Backup to start the backup process.
Migration tasks
Perform the following tasks to convert a processor port network to a port network (SCC).
Verifying hardware
Ensure that you have the conversion specific hardware on hand.
Removing the processor port network control cabinet
To remove the processor port network control cabinet:
1. Label both ends of all the cables that you will remove from all the cabinets. You will reuse
these cables.
To Next Page
Loading...
Need help?
General
