Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control1
Unit.2
4. To join a meeting hosted elsewhere, call the endpoint or MCU which hosts the meeting,3
using any of the above dial methods.4
5. To host a meeting on your built-in MCU by dialing out to other participants:5
a. Call the first participant (see
Starting a Meeting on page 47).6
b. Call others to join. From the XT Series web interface, select Make your Call > Basic7
Options > Direct Call / Contacts. From the endpoint, within the meeting with the first8
participant, press ok/menu and select Participants > Invite a new participant > By9
Address / From Contacts.10
11
Figure 30: Inviting a new participant from the endpoint interface12
c. Select a contact or enter a dial string to call the next participant.13
d. Repeat to add more participants.14
6. To host a meeting on your built-in MCU by giving your endpoint's contact details, be sure to15
give the correct information.16
To accept an incoming call, select Accept.17
Starting a Meeting
December 2017 Avaya Scopia
®
XT Series User Guide 49
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
