Unified Communications Module Installation and Maintenance Page 21
15-601011 Issue 03l (28 August 2012)IP Office
Module Installation: Initializing the Module Services
8.
Click Next. Enter basic details for the module.
· The default setting for the NTP Server is 169.254.0.1. This is an internal address for the IP Office system. If
this address is used, the IP Office system must be configured to gets its time from an external source or to
have its time set manually.
9.
Click Next. A summary of the settings is displayed.
10.
Click Apply. Alternatively use the the Previous and Next options to readjust the settings.
To Next Page
