VSP 7200 Series Description Part numbers
*Note: The character (x) in the order number indicates the power cord code. Replace the “x” with the proper
letter to indicate desired product nationalization. See the following for details:
“A”: No power cord included.
“B”: Includes European “Schuko” power cord common in Austria, Belgium, Finland, France, Germany, The
Netherlands, Norway, and Sweden.
“C”: Includes power cord commonly used in the United Kingdom and Ireland.
“D”: Includes power cord commonly used in Japan.
“E”: Includes North American power cord.
“F”: Includes Australian power cord.
Redundant fan modules
Important:
Make sure the air flow direction of your power supplies and fan modules match the same direction
(either front-to-back or back-to-front).
12 volt redundant fan module The VSP 7200 comes with three 12–V fan
modules for either front-to-back or back-to-
front air flow switch cooling.
EC7200BTF-E6 —
back–to–front fan
modules (includes three
fan module kits)
EC7200FTB-E6 — front-
to-back fan modules
(includes three fan
module kits)
Universal Slide Rack Mount Kit (300mm-900mm)
Slide Rack Mount Kit
(300mm-900mm)
The optional rack mount kit allows a switch to
be installed in a four post rack with depths
between 300mm and 900mm. It is designed
for use on the VSP 7200, VSP 8200 and VSP
8400.
EC8011002-E6
Note:
The universal slide rack mount kit is optional and must be ordered separately. VSP 7200, VSP 8200
and VSP 8400 ship with rack mount brackets. When using rack mount brackets on VSP 8200 and VSP
8400, Avaya recommends the use of a shelf to provide additional support.
Compatible transceivers
Important:
Avaya recommends using Avaya-branded SFP, SFP+, and QSFP+ transceivers as they have
been through extensive qualification and testing. Avaya will not be responsible for issues related
to non-Avaya branded transceivers.
• The VSP 7200 Series operates in forgiving mode for SFP transceivers, which means that
the switch will bring up the port operationally when using non-Avaya SFP transceivers.
Avaya does not provide support for operational issues related to these SFPs, but they will
Hardware models for VSP 7200 Series
October 2015 Installing the Avaya VSP 7200 Series 13
Comments on this document? infodev@avaya.com
To Next Page
Loading...
