• Avaya recommends enabling auto-negotiation to ensure proper operation at 100M speeds on
VSP 7254XTQ:
- Link instability will be seen if both ends are set to 100M auto-negotiation disabled and a
straight through cable is used.
- If Link instability is seen when using a cross-over cable, a port disable or enable can fix the
issue.
For more information, see Installing Transceivers and Optical Components on Avaya Virtual
Services Platform 7200 Series and 8000 Series, NN47227-301
Hardware models for VSP 7200 Series
October 2015 Installing the Avaya VSP 7200 Series 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...
