www.factorybuysdirect.com
9M130004/5-01
CONTROL SETTING CONT.
OPERATING INSTRUCTIONS OF THE REMOTE CONTROL:
Key operation of the high-quality remote control are as follows:
1. Power: Press the key to turn on or turn off the machine.
2. Mode: Press the key to switch between cooling, air supply, dehumidication
and heating (single cold with no such function) mode.
3. Up: Press the key to increase temperature and timer.
4. Down: Press the key to reduce temperature and timer.
5. Fan: Press the key to select high, medium, and low fan speed output
circulation.
6. Timer: Press the key to set timer.
7. Louver: Press the key to open or close louver. Air ow of the air outlet can blow
at different angles.
8. : : Press key to switch between Celsius and Fahrenheit.
cool only remote control
SKU#: 130004
cool + heat pump remote control
SKU#: 130005
PROTECTION FUNCTIONS
1. Frost Protection Function:
In cooling, dehumidication or economic power saving mode, if the temperature
of the exhaust pipe is too low, the appliance will automatically enter into protec-
tion mode; if the temperature of the exhaust pipe rises to a certain temperature, it
can automatically revert to normal operation.
2. Overow Protection Function:
When water in the water pan exceeds the warning level, the machine will auto-
matically sound an alarm, and the LDC temperature display area will show "FL".
At this point, you need to move the drainage pipe connecting the machine or the
water outlet a drainage area to empty the water (details see Drainage Instruc-
tions at the end of this chapter). After the water is emptied, the machine will
automatically return to the original state.
Figure 8
To Next Page