22
Operating the Camera
Make a Video Call
1. Make sure all devices (CAM520 Pro2, laptop/PC, TV/monitor) are well connected and powered
on.
2. Run your video application (Zoom, Microsoft
®
Teams, Skype for Business, Skype, Google Meet,
Intel
®
Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U Meeting
®
, TrueConf,
Adobe Connect, Cisco WebEx
®
, Fuze, GoToMeeting™, Microsoft
®
Lync™, Vidyo, vMix, WebRTC,
Wirecast, XSplit, etc.) on your PC or laptop.
3. Set the CAM520 Pro2 camera as the primary camera for your video application (refer to your
video application user guide). You can now make your call.
[Note] The CAM520 Pro2 is a plug-and-play conference camera. The system requires no special
drivers, but we do recommend installing the PTZApp 2 for a better user experience. For information on
how to install and use the PTZApp 2, refer to the PTZApp 2 section in this user manual.
Make a Connection through the Browser
CAM520 Pro2 has an Ethernet port for IP streaming and allows administrators to remotely control and
set up the camera via an internet access. Moreover, CAM520 Pro2 also supports RTSP and RTMP
functions. For more details, please contact our technical support.
1. Make sure the CAM520 Pro2 has an internet access connection.
2. Launch PTZApp 2* ( ) and connect CAM520 Pro2 to PC with USB cable. The camera default
IP address is 192.168.1.168.
[Note] The browser supports:
Chrome: version 76.x or above Firefox: version 69 or above IE: Doesn’t support
To Next Page
Loading...
