32
Tracking Mode
Select Setting > Camera > Tracking Mode > Off, Manual Frame, Auto Frame, or Preset Framing.
Off: Tracking mode is disabled.
Manual Frame: User one-click SmartFrame button and camera will adjust view angle to fit all
participants in screen.
Auto Frame: Camera automatically adjusts view angle to frame all participants on screen every
time when it detects participants’ faces or bodies. This action will be activated once people in the
room sit or stand still for 1~5 seconds, depending on the framing speed you select. Once all the
participants are in frame, the camera will keep the image stable by not completing any action until
subjects move in or out of the screen. When a participant touch the sides of the screen, it will
trigger the camera and automatically track, detect, and frame all the participants again.
Preset Framing: Set up preset points in advance. (Only for Preset points 1~9. Preset 0 is for
home position). This is designed for requiring a specific zooming area with preferred image
proportion. Camera tracks and frames all the participants in the screen if none of them touch any
preset area. When any of them touch a preset area, the camera will immediately
shoot the preset
zones instead of focusing and zooming into presenter. To keep the screen stable, whenever there
To Next Page
Loading...
