33
is a person in the area, the camera won’t move any more until no one shows up. However, the
camera can detect the direction where the last person goes. If the person goes to the next preset
area with overlap section, the camera will directly move to the next preset area. Thus, to ensure
smooth transition, please set up zones with overlapping presets.
If the preset zones do not overlap and when the last person leave the preset area, camera will
zoom out to wide to find people and frame them again.
If more than 2 presets areas are touched by 2 persons, camera will go to preset 1. The priority is
preset 1>preset2> preset 3….>preset 9
[Note]
CAM520 Pro2 frames people in masks or any facial profile up to 7~10 meters away!
Overlap beginning & end of each zone
To Next Page
Loading...
