AVer CAM520 Pro2 - Page 79

71
9. Setting: Click “Setting” button to setup parameters of the camera and speakerphone. Click
arrow icon to leave the Setting page.
 PTZ Control: Use control panel to setup preset positions. Since most of operations are the
same as web page, refer to Setup the Preset section (pages 28~29) for detailed setup.
 Setting: To setup parameters of the camera. Since most of operations are the same as web
page, refer to Camera Settings section (pages 31~39) for detailed setup.
 System: To setup system. Since most of operations are the same as web page, refer to
System Settings section (pages 53~62) for detailed setup.