For Gigabit Ethernet connection
For POS device connection
Input/output audio signal to audio input/output device.
- Audio input:16 channels
- Audio output: 1 channel
- Microphone input: 1 channel
The audio input and output device has its own power supply is necessary.
Output the video signal to a CRT or LCD monitor
Output the analog video signal to SPOT monitor when receive the alarm events
Output the analog video signal to a CCTV monitor.
For connecting with HDD or RAID.
When connect eSATA device, please make sure the DVR has installed hard disk to reduce abnormal situation
occurs.
For analog PTZ camera connection (also see Chapter 1.4.3).
Support up to 16 sensor devices
Support 4 relay devices (Relay: 1A @ 125V AC/30V DC).
Input the video camera signal and display it on channel 1~ 16.
Connect the power adaptor into this port.