AVer PTC500 - Advanced Setting; Preset

15
Advanced Setting
To adjust RS232 protocol, address and baud rate, select Advance Setting from OSD menu.
Tracking
On
Camera
Video Format
Advanced Setting
Preset
Language
Profile
Factory Default
Information
>
>
>
>
>
>
>
>
Preset
PTC-500 allows you to set 10 preset locations via remote controller.
 To set up preset point:
1. Enter OSD and turn off the tracking function.
2. Move camera to the prefer location and zoom distance.
3. Press bottom >
Preset
>
Set
and use arrow key to assign a preset number and press enter
button on remote controller.
[Tip] Shortcut of setting a preset location as following:
Press “P” button > press “↑” > press number you want to set, ex: 1 and press enter.
Tracking
On
Camera
Video Format
Advanced Setting
Preset
Language
Profile
Factory Default
Information
>
>
>
>
>
>
>
>
 To call a preset location:
Press bottom >
Preset
>
call
and use arrow key to select which preset number you would like
to recall -> press enter button on remote controller.
RS232 Protocol
Address(ADDRD)
Baud Rate
VISCA
1
9600
Set
Call
1
1