AVer PTC500 - Page 52

47
Setting menu
Sub menu
2nd sub menu
Note
Advance Setting
RS232 format protocol
VISCA
Protocol choose
Pelco D
Pelco P
ADDR (Gray out)
1
Baud rate (Gray out)
9600
Baud rate speed
adjustment
Profile Setting
Save as current setting
Profile 1
Profile setting location
Profile 2
Profile 3
Profile 4
Profile 5
Load other setting
System Setting
Change Camera
password
Camera ID: PTC500
Camera serial number
Software version:
1.XX.XX.XX
Software version
Download firmware
When user would like to
upgrade the firmware,
please press "Download
firmware" first. Then,
press "Upgrade firmware"
to do the upgrade.
Upgrade firmware
Last firmware version:
X.XX.XX.X2
Current firmware
version: X.XX.XX.X1
Factory Default
Back to factory default
Yes
Please reboot the
camera after setting
factory default
No (default)