AVer PTZ310 - Camera IP Address Configuration; Static IP Address Setup; DHCP IP Address Setup

16
Setup IP Address of the Camera
Static IP
1. Press
Menu
button on the remote control to call out OSD menu.
2. Go to Network > Static IP.
[Note] Turn the DHCP off before setup static IP (Network > DHCP > Off).
3. Select the IP address, Gateway, Mask, and DNS to configure. Press
and use

,

, number
pad to enter the data.
DHCP
1. Press
Menu
button on the remote control to call out OSD menu.
2. Go to Network > DHCP > On.
3. After turn the DHCP on, go to System > Information to view IP address.