AVer PTZ310 - System Settings and Information

19
System
 Camera Selector: Set the camera ID 1~4 for using remote control on multiple cameras control
(also see (2) Camera Select
in Remote Control chapter).
 Status OSD: Enable/disable Preset status (Save Preset, Call Preset, Cancel Preset) display on
the screen.
 Language: Change the OSD language.
 NDI: Enable/disable NDI function. The NDI function is only supported on PTZ310N/330N model.
The camera will reboot when enabling or disabling NDI function. To setup NDI camera ID, please
refer to NDI Function
section.
 Latency Reduction: It will cut off Digital zoom, Noise reduction and 720P Resolution option. The
camera will reboot when enabling or disabling function of latency reduction.
 Power saving
 ON: PTZ can be shoot down. Boot up only through IR remote, RS232 and WOL.
 OFF: PTZ set to standby, PTZ can be boot up through IR remote, RS232 and VISCA-over-I P.
System Camera Selector 1~4
Status OSD Off/On
Language English/日本語/繁體中文/簡體中文/한국어/Tiếng việt
NDI Off/On
CameraID PTZ330
Latency Reduction Off/On
Power Saving Off/On
Information Model Name/Version/IP Address/MAC
Factory Default Off/On