31
2. Set the preset positions in order (Preset 6 to Preset 9). Use direction control panel to move the
camera to wanted position and select “save” to save the preset position. And, a snapshot of the
preset image will show at corresponding image display box. Repeat the step to set another preset
position.
3. Set the “Initial Position” and “Time to back initial position”. The camera will go back to initial
position based on the time set at Time to back initial position.
4. Select “Enable” to activate the SmartShoot function. To stop the SmartShoot function, select
“Disable”.
[Note] In OSD menu, user can enable and disable SmartShoot function, too.
To Next Page
Loading...
