38
Command Set Command Command Packet Comments
Menu Enter 8x 01 7E 01 02 00 01 FF menu enter
CAM_Menu On/Off 8x 01 06 06 10 FF Display ON/OFF
Pan-tiltDrive Up
8x 01 06 01 VV WW 03 01
Pan-tiltDrive Down
8x 01 06 01 VV WW 03 02
Pan-tiltDrive Left
8x 01 06 01 VV WW 01 03
Pan-tiltDrive Right
8x 01 06 01 VV WW 02 03
Pan-tiltDrive UpLeft
8x 01 06 01 VV WW 01 01
Pan-tiltDrive UpRight
8x 01 06 01 VV WW 02 01
Pan-tiltDrive DownLeft
8x 01 06 01 VV WW 01 02
Pan-tiltDrive DownRight
8x 01 06 01 VV WW 02 02
Pan-tiltDrive Stop
8x 01 06 01 VV WW 03 03
Pan-tiltDrive Home 8x 01 06 04 FF
Pan-tiltDrive Reset 8x 01 06 05 FF
Absolute Position
8x 01 06 02 VV WW 0Y 0Y
0Y 0Y 0Z 0Z 0Z 0Z FF
VV: Pan speed setting 0x01
(low speed) to 0x18 (high
speed)
WW: Tilt speed setting 0x01
(low speed) to 0x18 (high
speed)
YYYY: Pan Position 8a14 ~
762c (center 0000)
ZZZZ: Tilt Position 468B ~
Pan-tiltSet
SlowPanTilt
On 8x 01 06 44 02 FF
Pan/Tilt Slow Mode On/Off
Off 8x 01 06 44 03 FF
Firmware Firmware version 8x 01 02 03 FF