42
Hybrid Mode
This function allows the user to use two types of tracking modes: “Presenter mode” and “Zone mode”
at the same time. When the presenter enters selected preset points, it will change to Zone position;
when the presenter leaves the preset points, camera will follow presenter to do Auto Tracking function.
1. Mix two tracking modes “Presenter” and “Zone” at the same time. For Hybrid mode, do not set
Zone preset points overlapping or close to each other. It is recommended to leave some distance
between Zone preset points.
2. Use direction control panel to move the camera to desired position and select “save” to save the
preset position. And, a snapshot of the preset image will show at corresponding image display box.
Select preset position and select “Delete” to delete the saved preset position.(Preset 10,11,12,13)
3. Set the sensitive level of tracking. Move bar to set the value. The current value is displayed at
upper right corner.
4. Set the idle time for camera returning to tracking point. Move bar to set the value (in seconds). The
current value is displayed at upper right corner.
To Next Page
Loading...
