22
System
Status OSD: Enable/disable Preset status (Save Preset, Call Preset, Cancel Preset) display on
the screen.
Camera Selector: Set the camera ID 1~3 for using remote controller on multiple cameras control
(also see (2) Camera select in Remote Control chapter).
NDI: Enable/disable NDI function. For detail setting refer to Setup NDI Function chapter.
Tally: Enable tally function.
System Camera Selector 1~3
Status OSD OFF/ON
Language English/繁中
NDI OFF/ON
Tall y Disable/Enable
Information Model Name/Firmware Version/IP /MAC
Factory Default OFF/ON
To Next Page
Loading...
