17
PTZ: To control the camera direction, zoom in and out, and to enable/disable the “Smart Framing”
during your video call.
Smart Framing: One-click automatic FOV adjustment to fit all participants. Click “Smart
Framing” button to enable Smart Framing manually.
[Note] While in conferencing meeting, participants must face the camera for face detection
(smart framing).
Settings: To setup parameters of the camera and speakerphone. Click the Save button to save all
settings. To change all the settings, back to the default values, click the Factory Default button.
WDR: In back light environment, enable WDR can improve the brightness of image. To enable
WDR function, set WDR to “On”. When press and hold the button “1” on the remote controller
can on/off the WDR function and the screen will display a message “WDR ON” or “WDR OFF”
to indicate the WDR status.
To Next Page
Loading...
