User’s Manual
11
Main Menu On Screen Display Usage
TV SOURCE
F
Use the CH? or CH? buttons to
select between air or cable TV
source, then press Vol? button
to make the selection.
CH FINETUNE
If the TV reception is not clear,
choose CH FINETUNE then
press Vol? and Vol? buttons
until the TV picture becomes
clear.
CH SCAN
F
Use the CH? or CH? buttons to
select between CH SCAN or All
FREQ SCAN, then press Vol?
button to make the selection. If
you want to interrupt or cancel the
scanning process, press the
MENU button but this will only
memorize the scanned channel.
These two types of channel-
preset functions memorize all
active channels in your area.
Use the CH SCAN function first.
If there are channels missing after
you perform CH SCAN, use the
ALL FREQ SCAN function and
repeat the searching process.
NOTE: ALL FREQ SCAN is a
very time consuming process. If
the default frequency table
already includes all active TV
channels in your area, then avoid
using the ALL FREQ SCAN.
To Next Page
Loading...