Model 6700 Family User’s Manual
7
Initial Setup
1. Remove contents of the shipping container.
2. Inspect the scale for evidence of shipping
damage. Immediately report any damage to
the shipper.
1. Mount the scale on a stable, level surface
that is free from air currents and vibration.
Be sure the scale platter does not touch any
adjacent surfaces.
2. To install the scale surface flush with a
countertop, use the dimensions on the
following page to guide construction.
Scale Dimensions Min. Cut-Out Dimensions
D 10.4 in. (26.4 cm) 11.1 in. (28.2 cm)
W 6.4 in. (16.3 cm) 7.1 in. (18.0 cm)
H 2.5 in. (6.35 cm)*
*Adjustable to 3.0 in. (7.6 cm)
Scale Dimensions Min. Cut-Out Dimensions
D 10.4 in. (26.4 cm) 11.1 in. (28.2 cm)
W 10.4 in. (26.4 cm) 11.1 in. (28.2 cm)
H 2.5 in. (6.35 cm)*
*Adjustable to 3.0 in. (7.6 cm)
Scale Dimensions Min. Cut-Out Dimensions
D 12.6 in. (32.0 cm) 13.25 in. (33.7 cm)
W 14.1 in. (35.8 cm) 14.75 in. (37.5 cm)
H 4.1 in. (10.4 cm)*
*Adjustable to 4.6 in. (11.7 cm)
Unpacking the Scale
Installing the Scale
Model 6702
Model 6710
Model 6720
To Next Page
Loading...
