05/09 Rev. 5.02-01 OPERATING MANUAL Device Description
ALX 92x
10
Remote operator panel ALX 92x Gen. 3 (or higher) machines can be equipped with a remote operator
panel. For this, the machine must provide the appropriate - optional - connec-
tor, see Connections on page 5. The connection can be retrofitted (see serv-
ice manual).
The button functions are the same as those on the standard operator panel.
Exception: The on/off switch is not available at the remote operator panel.
With the remote operator panel connected, both panels are active and show
the same information.
[6] Remote operator panel (article number A8293)
CAUTION!
Manipulating both operator panels simultaneously can cause malfunctions.
« Always use only one operator panel at a time to operate the machine.
(Using both operator panels alternately is admissible).
CAUTION!
If the connection cable is longer than 2.5 m, EMC-caused disturbances can
occur.
« Only use the factory-installed cable.
« Don´t extend the cable.
To Next Page
Loading...
