05/09 Rev. 5.02-01 OPERATING MANUAL Device Description
ALX 92x
18
Plug-in card You require the following to load a print job from a CF card:
• CF card (copy the print job to the directory \FORMATS)
• CF card reader (to connect to your computer)
A detailed description can be found in topic section „Advanced Applications“,
chapter Selecting files from CF card on page 10.
Applying CompactFlash cards
CF = CompactFlash
[8] Example: A 32 MB CF card (T1).
A Slim guide notch
B Wide guide notch
C Contacts
Suitable CF cards: see Plugin-card manual, topic section „Card types“,
chapter CompactFlash card .
Applying CF cards: see Plugin-card manual, topic section „Application“,
chapter CompactFlash card .
Inserting a CF card 1. Switch off the device. Wait for 5 seconds.
2. Insert the CF card [9A] into the card slot, contact side first. The card’s label
is on the right side.
¯ Push the CF card into the slot until the release button [9B] comes out.
¯ The differently sized guide notches [8] of the CF card prevent the card
from being inserted wrongly. For the card to be inserted correctly, the wider
guide notch needs to be on top.
CAUTION! - Observe the following guidelines to avoid damaging the device
or the CF card.
« Only use CF -cards approved by the manufacturer.
« Always wait at least 5 seconds after switching off the device before remo-
ving or inserting the CF card.
« When inserting or removing the CF card, never use force.
AB
C
To Next Page
Loading...
