05/09 Rev. 5.02-01 OPERATING MANUAL Device Description
ALX 92x
8
Operator panel
[5] ALX 92x operator panel.
Power indicator [5A] Lights up green, when the device is switched on.
Error indicator [5B] Lights up red, when the device is in message mode.
Display [5D] With 32 digits and two lines, the display shows the operating conditions
(modes) for parameters, values, status and errors. You can select the lan-
guage you want to use for the display. Backlighting ensures good legibility.
Button functions The buttons offer a multitude of operating functions. A logical menu structure
is used for operation. The meaning of each button varies according to the op-
erating mode and the menu item. Additionally, special functions have been
programmed for certain button combinations.
Depending on the modes and menu levels, the following functions apply for
each button:
On/Off button [5C] Switches the device on or off. To reach this, hold the button longer than
2 seconds pressed. Precondition: The mains switch must be switched on (po-
sition „I“, see Connections on page 5).
Online button
• See [5G]
• For switching between online and offline mode.
• For confirming entries, menu items and messages.
• For selecting print jobs and for entering values in standalone mode.
AB
C
D
E
F
G
H
To Next Page
Loading...
