Getting Started 1-1
G ETTING STARTED
The Avery Dennison® Monarch® 9419 Printer prints on thermal transfer (ribbon) and
thermal direct labels or tags. The printer prints labels continuously (in one strip) or on-
demand (one label at a time). You can print on die cut, black mark, or continuous (non-
indexed) supplies.
The printer operates in either online or offline mode:
Online Mode Use online mode when the printer receives print data from a
connected host (PC or network). For online mode information, refer
to the Online Mode System Administrator’s Guide.
Offline Mode Use offline mode (stand-alone mode) when the printer receives data
from a keyboard or scanner. The printer is not connected to a host.
The printer comes pre-loaded with nine standard formats. Custom
offline formats can be loaded.
This manual contains information about using offline mode.
Audience
This manual is for the System Administrator who configures and updates the printer for
use in offline mode.
♦ To load supplies, print labels, or care for the printer, refer to the Equipment Manual.
♦ To create format and batch packets for printing or how to configure the printer online,
refer to the Packet Reference Manual.
Use the Printer Management Utility to transfer files to the printer and configure the
printer. See Appendix A, “Using the Printer Management Utility
” for more information.
Using the Control Panel
The control panel has an LCD display with two function buttons and a navigation button.
To Next Page
Loading...
