2
Using the Control Panel
The control panel has a two-line LCD display, 2
status lights, and five buttons. The control panel
displays error codes/messages, and allows you to
setup/configure the printer.
Power: The printer shows a steady green
light when it is on.
Fault: The printer shows a steady amber
light when it is out of labels or
ribbon, or when you have a supply
jam.
Feed/Cut: Prints a label in the on-demand
mode, feeds a blank label if there is no print job, and
prints a label with error information that is useful to
your System Administrator if an error is displayed.
Enter/Pause: Pauses the current print job or resumes a paused print
job. Selects the displayed menu item.
Escape/Clear: When an error is present, clears the error. When a job
(batch) is printing, cancels the print job (batch).
Enters the offline menu mode or returns the display to
the next higher menu.
Left Arrow: Displays the previous menu item.
Right Arrow: Displays the next menu item.
Both Arrows: Prints test labels when you press the buttons at the
same time. Hold for one second and release.
To Next Page
Loading...
