- 27 -
LCD Setup
Under DVD mode, press the LCD SETUP button on the remote control or TV/LCD
SETUP button on the front panel, there will be a PICTURE setup menu displayed on
the screen.
Brightness, Contrast, Color, Tint
Press the direction buttons to select the desired item (Brightness, Contrast,
Color, Tint). Press the direction buttons to adjust the item’s level between 0 and
20.
LANGUAGE
Press the direction buttons to select the Language, press thedirection
buttons to select the desired language.
TV MODE
Press the direction buttons to select the TV MODE, press thedirection
buttons to change the screen aspect ratio between 16:9 and 4:3, and it is not
available when the screen is in blue mode.
Reset
Select Reset and press the OK button to resume the original status.
First use the direction buttons to highlight the PICTURE, then press the button
to exit from the setup menu. Or press TV/LCD SETUP button to exit.
z The PICTURE setup menu will disappear automatically if you don’t have any
operation for seconds.
PICTURE