BRIGHTNESS 10
CONTRAST 10
COLOR 10
TINT
10
LANGUAGE ENGLISH
TV MODE 16:9
RESET
Ż EXIT
AV Function
AV Function
The player has an additional AV input so it can function as a monitor for a DVD player,
video cassette player, satellite receiver, video game, etc. When an AV source is
connected, press the AV button on the remote control or the SOURCE button on the
front panel to enter external input AV mode.
Picture Parameter Setup
Press the LCD/SETUP button on remote control or the TV/LCD SETUP button on the
front panel to enter the PICTURE setup menu, and the screen will display as shown
below:
Use the CH+ or CH- button to select the desired item (Brightness, Contrast, Tint
and Color).
Use the direction button to adjust the items’ level between 0 and 20.
Use the CH+ or CH-button to select LANGUAGE, then press the button to
select the desired language.
Use the CH+ or CH-button to select the TV MODE, then press the direction
button to change the screen aspect ratio between 16:9 and 4:3, and it is not available
when the screen is in blue mode.
Select RESET and press the OK button to restore the settings to the original factory
default state.
First use the buttons to highlight PICTURE, then press the button on the
remote control to exit from the setup menu.
Under AV mode, if there is no signal, the LCD screen will be blue screen.
When connected to an AV signal source, make sure the type of the selected AV
signal source is PAL.
To Next Page