Avid Technology Fast Track Solo User Manual

Chapter 2: Controls and Connectors 7
Back Panel
1 – Lock Port
Use this port to secure Fast Track Solo using a
Kensington-style security lock.
2 – 48V Phantom Power Switch
When this switch is in the “on” position, 48V
phantom power is sent to the front microphone
panel input. Enable phantom power for condenser
microphones that require external power. The
Phantom Power Indicator LED illuminates when
phantom power is on.
3 – Tablet Port
This port is used for connecting Fast Track Solo to
an iPad.
4 – USB Port
This port is used for connecting Fast Track Solo to
your host computer, using the supplied USB cable.
If you are using Fast Track Solo with an iPad, use
this port to connect a USB power adapter.
5 – Line Outputs
Use this stereo pair of RCA jacks to connect
Fast Track Solo to either a pair of powered studio
monitors, a mixer, or stereo amplifier. The level
for these outputs is controlled by the Output Level
control on the front panel.
1234 5
Although phantom power can be used
safely with most microphones, it is possi-
ble to damage some ribbon microphones.
Always turn off phantom power and wait
at least ten seconds before connecting a
ribbon microphone.
Refer to the documentation for your
microphone for more information about
its power requirements.

Avid Technology Fast Track Solo Specifications

General

Brand	Avid Technology
Model	Fast Track Solo
Category	Recording Equipment
Language	English