Need help?Do you have a question about the Avid Technology Pro Tools Carbon and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Mic Preamps | 8 |
| A/D Resolution | 24-bit |
| Sample Rate | 192 kHz |
| Bit Depth | 24-bit |
| Word Clock | Yes |
| MIDI I/O | Yes |
| Software | Pro Tools |
| Phantom Power | Yes |
| Built-in DSP | Yes |
| Connectivity | AVB |
| Input Channels | 8 |
| Output Channels | 8 |
| AD/DA Conversion | 24-bit |
| Analog Inputs | 8 |
| Analog Outputs | 8 |
| Digital Inputs | 2 x ADAT, 1 x S/PDIF |
| Digital Outputs | 2 x ADAT, 1 x S/PDIF |
| AVB/Ethernet | Yes |
| DSP Processing | AAX DSP |
| Compatibility | macOS |
| Headphones | 2 headphone outputs |
Provides warnings about potential hazards such as electric shock and fire.
Key instructions for safe operation and maintenance of the equipment.
Overview of the front panel controls and indicators of Pro Tools | Carbon.
How to select input sources and adjust gain, impedance, polarity, and phantom power.
Diagram and description of the back panel connectors and ports.
Selecting Pro Tools | Carbon as the audio playback engine.
Configuring monitor sets, headphone sources, and function switch assignments.
Setting up input and output routing for Pro Tools | Carbon.
Steps to enable DSP Mode on tracks for low-latency monitoring.
Preventing automatic DSP Mode enabling on specific tracks.
Detailed specifications for microphone preamp and line inputs.
Using the I/O device for macOS system sound and third-party applications.
To Next Page
