Avid Technology Pro Tools Carbon User Manual

47
Appendix D: Network Port Usage
Required Access for Normal Operation
The following services are required for normal operation of Pro Tools | Carbon. The actual ports that are used in the reserved range may
vary depending on the firmware version that is running on the device.
In addition, Pro Tool | Carbon requires an mDNS service to be running on the connected Mac host.
mDNS is enabled by default on macOS.
Access for Customer Support
The following services are not required for normal operation of the device, but may be required for certain procedures requested by Avid
customer support. Services that are disabled by default may be enabled when following instructions from Avid customer support.
Network Security
Pro Tools | Carbon should not be made visible to network devices beyond the Mac host. Do not connect Pro Tools | Carbon to a bridged
network interface on your Mac.
Port Protocol Purpose
5556 TCP Diagnostics
6655-6670 TCP Control and communication
5353 UDP mDNS Discovery and connection
51792
57531
Port Protocol Purpose Enabled by Default
21 TCP FTP for device firmware repair No
22 TCP SSH and SFTP for troubleshooting and firmware repair Yes
23 TCP Telnet for device access and diagnostics No
80 TCP HTTP for device status information and log collection Yes

Avid Technology Pro Tools Carbon Specifications

General

Brand	Avid Technology
Model	Pro Tools Carbon
Category	Recording Equipment
Language	English