Need help?Do you have a question about the Avid Technology Pro Tools S3 and is the answer not in the manual?
General| Brand | Avid Technology |
|---|---|
| Model | Pro Tools S3 |
| Category | Recording Equipment |
| Language | English |
Explains how EuControl software links the S3 to your workstation for control and customization.
Details the use of Ethernet AVB for high-fidelity audio connections with the S3.
Lists the components provided with the S3 control surface.
Specifies the hardware and software compatibility requirements for the S3.
Explains the document's conventions for menu choices, key commands, and symbols.
Identifies and describes the physical switches on the S3 control surface.
Provides tips and features for navigating and using the PDF guide effectively.
Lists helpful online resources and services available from Avid.
Step-by-step instructions for physically connecting the S3 to your workstation.
Explains how to switch the S3 between Studio and Live operating modes.
Guide to installing the EuControl software on your workstation computer.
Instructions on how to ensure the S3 is running the latest firmware version.
Steps to enable EUCON control within Pro Tools for S3 integration.
Verifies that the S3 is successfully communicating with Pro Tools via EUCON.
Details the correct power-on sequence for the S3 and workstation.
Instructions for connecting the S3 to an additional workstation.
Explains how to connect and use a footswitch with the S3.
Steps to ensure optimal functionality after updating Pro Tools.
Details the components and functions of each S3 channel strip.
Explains the information shown on the OLED displays for each channel strip.
Describes the touch-sensitive encoders and their parameter adjustment capabilities.
Explains how to assign parameters or 'Knob Sets' to the Channel Encoders.
Details how to navigate through banks of tracks using the Bank and Nudge switches.
Describes the functions of the switches located in the Left Control section of the S3.
Overview of the top-row encoders and associated navigation switches.
Explains the function of view recall and zoom controls on the S3.
Details how to cycle through connected applications and workstations.
Describes the functions of the Solo Clear and Mix to Monitors switches.
Describes the functions of the switches located in the Right Control section of the S3.
Explains how to access secondary functions using the Surface SHIFT switches.
Details how the Modifier switches duplicate computer keyboard modifier functions.
Describes the default transport controls and customization options for the Touchstrip.
Shows how to select, attention, and route tracks to outputs within Pro Tools.
Explains how to select and attention tracks using the S3's Sel switches.
Guide to adjusting track volume with faders and pan with encoders.
Details how to control multichannel pan parameters using encoders.
Explains how to use track and deck record enable commands on the S3.
Describes how to map encoder parameters to faders and vice versa.
Instructions on how to route track I/O using Channel Encoders or Channel Control.
Explains how to add, remove, suspend, or enable Pro Tools track groups.
Details how VCA Spill modes allow quick access to VCA-assigned channels.
Describes how to spill multiple VCA Masters and their member tracks.
Explains how to quickly recall the last VCA that was spilled.
Covers assigning and adjusting plug-ins using Channel Control and Encoders.
Steps to assign plug-ins to tracks using Channel Control and the Config switch.
Guide to adjusting plug-ins via Channel Encoders using Inserts, EQ, or Dyn Knob Sets.
Instructions for adjusting plug-ins via Channel Control using Inserts, EQ, or Dyn Knob Sets.
Explains how to assign and adjust Pro Tools sends using the S3.
Steps to assign sends to multiple tracks using Channel Control.
Guide to accessing and adjusting send levels, muting, and panning.
Explains how to mute or unmute individual sends using Channel Encoders or Control.
Details various ways to control automation settings using the S3.
Explains how to select track automation modes using REC/AUTO and Function switches.
Details the available automation modes assigned to the Function switches.
Shows how to display Send level automation in the Edit window.
Shows how to display Send pan automation in the Edit window.
Covers enabling plug-in parameters for automation from the S3.
Explains how to suspend faders to prevent them from moving during playback.
Steps to enable the S3's audio connection on the workstation computer.
Provides an overview of the S3's analog inputs and outputs.
Explains how to access the S3's built-in I/O controls via Channel Control Encoders.
Guide to connecting and adjusting the S3's mic and line level inputs.
Instructions for connecting and adjusting the S3's main and alternate outputs.
Details how to use inputs/outputs for inserting external hardware.
Explains how to connect and adjust the S3's headphone output volume.
Instructions on how to save current monitor settings on the S3.
Explains how to customize S3 switches using the Soft Key Editor.
Guide to viewing soft key assignments in the EuControl software.
Details how to reassign switches, add new commands, or revert assignments.
Steps to add a new command or assignment to an S3 switch.
How to assign a Pro Tools keyboard shortcut to an S3 switch.
Instructions on how to open the EuControl Settings window.
Shows media controllers connected to your instance of EuControl.
Establishes the list of workstations the Workstation switch cycles through.
Controls how the S3 and application software work together.
Allows workstations to attention tracks when their fader is touched on the S3.
Banks S3 to tracks when they are selected on-screen.
Shows track numbers assigned by the workstation in the channel displays.
Lets you configure S3 for different Solo modes available in the workstation.
Configure settings for Footswitch, VCA Spill Zone, and Fader behavior.
Manages how tracks are assigned to S3 channel strips.
Allows storage and recall of custom fader layouts.
Restarts all EUCON applications, including EuControl software.
Details the audio performance specifications for the S3 control surface.
Audio specifications for the S3's analog mic inputs with pad enabled.
Specifications for the S3's analog outputs.
Specifications for the S3's headphone output.
Information regarding the disposal of waste equipment in the European Union.
Details FCC compliance statements for radio and television interference.
Information regarding Australian compliance regulations.
Details compliance with Canadian Interference-Causing Equipment Regulations.
Declares conformity to EMC, Safety, and RoHS directives.
Information regarding Korean EMC compliance.
Provides important safety instructions and warnings for the equipment.
To Next Page