Avid Technology Pro Tools S3 User Manual

Using S3 with Pro Tools 39
Adjusting Plug-Ins Using the Channel Encoders
To adjust plug-ins on the Channel Encoders using the Inserts Knob Set:
1 Press Insert. Plug-ins assigned to first Inserts slots (a) for the currently banked channels are shown in the channel displays. If
no plug-in is inserted in that slot for the corresponding track, the Inserts slot letter is shown.
2 Press the Channel Encoder under the display showing the plug-in you want to access. Channel mode is enabled on the Channel
Encoders, and the parameters for the selected plug-in on the attentioned track are spilled across the 16 Channel Encoders.
3 Do any of the following to adjust parameters:
• Rotate the Channel Encoder below the desired parameter to adjust its value.
• Press the Channel Encoder
In switch to toggle the corresponding parameter on/off, where applicable.
• Press the Channel Encoder
Sel switch to toggle a secondary parameter on the Channel Encoder, where applicable.
4 Press the lit < Page > Channel Encoder Navigation switches to access more parameters.
5 Press the Back Channel Encoder Navigation switch to exit that plug-in and Channel mode.
6 Press the lit Page > Channel Encoder Navigation switch to access the next Inserts slots.
To adjust an EQ plug-in on the Channel Encoders using the EQ Knob Set:
1 Select a track, and make sure it is attentioned.
2 Press EQ. Channel mode is enabled on the Channel Encoders, and the parameters for the first EQ plug-in on the attentioned track
are spilled across the 16 Channel Encoders.
3 Press Pan to exit the plug-in and Channel mode.
To adjust a Dynamics plug-in on the Channel Encoders using the Dyn Knob Set:
1 Select a track, and make sure it is attentioned.
2 Press SHIFT + Inserts/Dyn. Channel mode is enabled on the Channel Encoders, and the parameters for the first dynamics
plug-in on the attentioned track are spilled across the 16 Channel Encoders.
3 Press Pan to exit the plug-in and Channel mode.
Insert switch (left); Channel displays showing the first Inserts slots for tracks 1–3
Channel displays in Channel Mode showing EQ parameters, with the attentioned track at the left (“Kick”)
Group Channel
Dyn
Mix
Insert Pan
Aux Flip
Input EQ
Gain
HPF
Comp
Pan
Aux
Flip
Kick
EQ3-7Bnd
1
Snare
Dyn3CmpL
2
Hats
a
3
Hats
LF Gain
3
Snare
2
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Kick
LF Q
1

Avid Technology Pro Tools S3 Specifications

General

Brand	Avid Technology
Model	Pro Tools S3
Category	Recording Equipment
Language	English