S3 Surface Controls Overview 24
View and Arrow Switches
By default, these switches provide recall of Memory Locations, and zoom controls. You can also customize these switches in Eu-
Control. See
Soft Keys for more information.
View 1 and View 2
Recall Memory Locations 1 and 2 respectively. If no Memory Locations exist, these switches do nothing.
▲ ▼
Adjust vertical zoom (track height) of all tracks in the Timeline display of the Edit window.
◄ ►
Adjust horizontal zoom (zoom in/out) of all tracks in the Timeline display of the Edit window.
Application/Workstation Switch
This switch lets you cycle through the available applications and workstations.
Application
Toggles between the two most recently used open applications. Hold down Application and press Bank > to cycle
through all open applications. Hold down the
Application key and press < Bank to cycle through applications in the opposite di-
rection.
Workstation (Surface SHIFT + Application/Workstation)
Attaches the S3 to another workstation, where applicable. S3 can con-
trol applications running on a second computer, referred to in this guide as a workstation. You must first use EuControl to create
a list of workstations that this key switches between. See
Workstations for more information.
Solo Clear and Mix to Monitors Switches
These switches provide the following functions:
Solo Clear
Clears any currently soloed channels.
Mix to Mons
Is not currently implemented for DAW use.
Window Navigation controls
Application/Workstation switch
Solo Clear and Mix to Monitors switches
To Next Page
Loading...
Need help?
General
